Startset Profi N scale | complete digital MCC car system

Start with digital model cars, complete in one go

Working out for yourself which control unit, decoders, feedback sensors and road components you need is a considerable task. The Startset Profi in N scale takes that decision off your hands: a fully assembled set with which you build a working digital car system straight away, including points, road sections and control software.

What is in the set?

• UCCI/E control unit with matching power supply
• 10 metres of magnetic tape for the steering track
• 8 SHDec feedback sensors for position detection
• 20 metres of transmission wire for the loop
• Digital MCC flatbed lorry with LiPo charger
• Road sections for an oval, with 2 bus stops
• OC32/NG decoder for points and accessories
• 2 servo points with servo module
• iCar licence for control from your PC

Key features

• Fully complete – control unit, vehicle, road, points and software in one set
• N scale – matched to the smaller layout
• Run straight away – the vehicle is already digital and comes with a charger
• 8 feedback sensors – your layout knows where the vehicle is from day one
• Points control included – OC32/NG with 2 servo points and servo module
• iCar licence – drive and plan routes from your PC

Applications

• First build of a digital MCC car system
• Extending a railway layout with moving road traffic
• Demonstration and club layouts
• A ready-made gift for the experienced modeller

Installation

1. Step 1 – Set out the route with the supplied road sections and bus stops.
2. Step 2 – Lay the magnetic tape as the steering track beneath the road surface.
3. Step 3 – Lay the loop with the supplied transmission wire and connect it to the UCCI/E.
4. Step 4 – Position the 8 SHDec feedback sensors at the required detection points.
5. Step 5 – Connect the OC32/NG with servo module and set up the 2 servo points.
6. Step 6 – Activate the iCar licence and connect your PC to the control unit.
7. Step 7 – Charge the lorry with the supplied LiPo charger and start your first run.

Specifications

• ✓ Complete starter set for the MCC car system
• ✓ Scale: N
• ✓ UCCI/E control unit including power supply
• ✓ 10 metres of magnetic tape and 20 metres of transmission wire
• ✓ 8 SHDec feedback sensors
• ✓ Digital MCC flatbed lorry with LiPo charger
• ✓ Road sections for an oval with 2 bus stops
• ✓ OC32/NG decoder, 2 servo points and servo module
• ✓ iCar licence included
• ✓ Weight: 950 grammes

Perfect for

• Experienced modellers who want every capability from the start
• Railway modellers extending their layout with road traffic
• Clubs and societies building a demonstration display
• Anyone unwilling to lose time assembling separate components

Benefits

• No searching – every component matches the others
• Immediate result – a running, reporting system in a single evening
• Expandable – the UCCI supports 2 x 20 m loop and 128 feedback sensors
• Good value – cheaper as a set than all the parts separately

MCC Quality Guarantee

• Extensively tested and reliable
• Professional technical support
• Clear instructions and documentation
• Fast delivery
• Full guarantee on your investment

Combine with other MCC products

• MCCDec02 / MCCDec03 – car decoders for additional vehicles
• Magnetic tape – extra steering track for a longer route
• Transmission wire 20 m – for a second loop
• SHdec / SWdec – additional feedback modules
• RM-C – connection module for several UCCI control units
• PFH – H-bridge amplifier for matrix points control

Everything in one box: from bare baseboard to moving road traffic.

Tags: starter set, Startset Profi, N scale, MCC car system, UCCI/E control unit, magnetic tape, transmission wire, SHDec feedback sensor, OC32/NG, servo point, iCar licence, road sections, bus stop, digital model car, MCC